HCOTEG176250 | Measurement: densitometers

Densitometers are most commonly required to indicate a change in density of the oil passing through a pipeline, for example at an interface. Normally they are not used to measure density to a high degree of precision.

There are a variety of densitometers in use.

• “Balanced flow” type. A sample of the liquid flows through a fixed volume chamber where it is weighed or compared with a predetermined weight.

• “Displacer” type. A float or plummet is immersed in the liquid and the density of the liquid determined from the effect on its buoyancy.

• “Gamma-ray” type. A source of gamma radiation and a radiation detector are mounted to measure the degree to which the radiation is absorbed by the liquid. Absorption depends upon the density of the liquid.

• “Vibrating” type. Mechanical energy, usually produced by electromagnetic apparatus is used to set up vibrations in the liquid. The density, or change in the density, of a liquid can be determined from the amplitude or frequency of the vibrations which vary with the density of the liquid.